AGT 12V Waterproof Wireless Remote Control DC Universal 2-Channel Output Works LED Lights

July 23, 2017 - Comment

12V Wireless Controller with Dual Outputs (12V) to your electronic, LED, Relay or anything operating at 12V up to 5 Amps per channel. This is 60W max per channel; Please do not over power these as the board will heat up and blow Coding: All remotes and controllers for this model are coded the same,

Buy Now! $19.95Amazon.com Price
(as of August 16, 2017 3:31 am UTC - Details)

12V Wireless Controller with Dual Outputs (12V) to your electronic, LED, Relay or anything operating at 12V up to 5 Amps per channel. This is 60W max per channel; Please do not over power these as the board will heat up and blow

Coding: All remotes and controllers for this model are coded the same, so they will activate each other, HOWEVER you must open the receiver and press a button to program in such manner: 1. Open receiver with screw driver, 2 power receiver with 12V DC, Hold the learning button inside, very small button, until light flashes. Press a button the the remote you are programming. A light will shine if program is successful. Test and hear for clicks with the remote pressing on/off. If you wish to delete that remote, hold the learning button until the light shuts off. This means all codes have been removed from the receiver

Product Features

  • ON-OFF – 12V Wireless Controller with Dual Outputs (12V) to your electronic, LED, Relay or anything operating at 12V up to 5 Amps per channel (60 Watts)
  • INPUT VOLTAGE – 12V +/- 1V from battery or AC-DC power supply
  • LONG RANGE – High Performance and Range Operation up to 100 Feet; Turn on/off devices remotely
  • WATER RESISTANCE – Remote and Reciever can be used anywhere! Including outside! Can be used on Boats, Marine, Car, Truck and more
  • INCLUDES – 2x Remote Controllers (Batteries installed), 1 Receiver and basic instructions on package

Comments

Billy J. Amazon Customer says:

Not waterproof or for use outdoors Since purchasing and reviewing the switch, I’ve discovered it is absolutely NOT waterproof from rain. Unfortunately the rain and failure occurred after the 30-day return period. 

Tdog says:

Beware, wired backwards at factory. Wasted time! After about 4 hours of messing around with this, I looked up if others had issues and sure enough they had. It was wired and manufactured backwards! Black to positive and Red to negative! Fried position one so only have position 2 that works after having to rewire it backwards. I did not install this for a while after purchase so I did not discover for a while and likely have no recourse. Would like to have one that was made correctly to see how well it works. Great idea and 50% works for me…

Ken says:

The input wires DC + (RED ) and – (BLACK) … The input wires DC + (RED ) and – (BLACK) are in the wrong place inside the kit and they are switched.!! this is causing to burn out the unit.I gave it three stars even though should have been one star, because i thought maybe i got the defected unit.

Write a comment

*